If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

Cycle-Slips Detection with three-frequency signals

From Navipedia
Revision as of 11:26, 23 February 2012 by Carlos.Lopez (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


FundamentalsFundamentals
Title Cycle-Slips Detection with three-frequency signals
Author(s) J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain.
Level Basic
Year of Publication 2011

The cycle-slip detection reliability can be significantly improved with three-frequency signals. Indeed, on one hand the Extra-wide-lane combination provides a several meters wavelength that dramatically improves the sensibility of this code-based detector, overcoming most of the problems mentioned in the article Detector based in code and carrier phase data: The Melbourne-Wübbena combination. On the other hand, two independent geometry free combinations are possible to generate, which allow to relay the detection in carrier-phase data detectors as those described in article Detector based in carrier phase data: The geometry-free combination

Thence, a simple scheme can based in the following elements: (1) Two carrier-phase based detectors for two independent geometry free combinations. (2) A Melbourne-Wübbena detector using the extra-wide-lane combination.